ZAMST IW-1 SET Gebrauchsanleitung Seite 7

Attaching the product to your
shoulder
• The attachment steps below use the right
shoulder for reference. Follow the same
attachment steps for the left shoulder.
* The illustration shows the procedure to be
followed when using two ice bags. Follow the
same attachment steps when using one or
three ice bags.
1.
Attach the supplied fix strap to the
icing wrap.
<When attaching to right shoulder>
<When attaching to left shoulder>
Attach one end of the hook-and-loop fastener
of the fix strap to the approximate location
indicated in the illustration at the top.
* When attaching the product on your left
shoulder, refer to the illustration indicating the
approximate location for your left shoulder.
2.
Attach the product to the area you
want to cool.
Attach the product to the part of your
shoulder you want to cool while holding the
product with the finger hole on the front.
3.
4.
Pull the fix strap and attach it to the front of
the icing wrap.
5.
Finger hole
Fasten the elastic strap.
Hook your finger into the finger hole. Pull
the elastic strap with your other hand and
wrap it around your body, then attach the
hook-and-loop fastener.
Fasten the fix strap.
Make sure that the icing wrap is
not loose or misaligned. If you feel
any discomfort, repeat the steps
from the beginning to reattach the
product.
The product correctly fastened
<Front view>
Elastic strap
<Back view>
IW-2 SET 7
EN
CA
ES
FR
IT
NL
DE