ZAMST IW-1 SET Gebrauchsanleitung Seite 4

Attaching the product to your wrist
• The attachment steps below use the
right wrist for reference. Follow the same
attachment steps for the left wrist.
1.
Make a loop with the temporary
fastening strap.
Put the ice bag into the product, and make a
loop with the temporary fastening hook-and-
loop fastener by attaching one end of it to the
outside of the icing wrap.
2.
Insert your hand and position the ice
bag against the area you want to cool.
Insert your hand into the loop that you made
in step 1, and slide the product up to the area
you want to cool. If the product becomes
misaligned, adjust the temporary fastening strap.
* If you have difficulty inserting your hand into
the loop, place the product on the desired
area first, then attach the temporary fastening
strap as shown in the illustration.
4 IW-1 SET
3.
Wrap the straps.
Pull and wrap straps A and B one at a time
on either side of the ice bag cap, and fasten
hook-and-loop fasteners A and B to the
surface of the icing wrap.
The product correctly fastened
<For right wrist>
Attaching the product to your knee
• The attachment steps below use the
right leg for reference. Follow the same
attachment steps for the left leg.
1.
Temporarily fasten the icing wrap.
Temporary
fastening strap
Put the ice bag into the ice bag pocket in the
icing wrap and attach it to the part of your
knee you want to cool. Wrap the temporary
fastening strap around the back of your knee,
pull it, and attach the temporary fastening
hook-and-loop fastener to the icing wrap. If
the temporary fastening strap feels excessively
tight, you do not need to attach it. If you
are not using the temporary fastening strap,
fasten the temporary fastening hook-and-
loop fastener to the napping fabric for the
temporary fastening strap.