ZAMST IW-1 SET Gebrauchsanleitung Seite 3

3.
Put the ice bag inside the ice bag
pocket and pull it into shape.
Ice bag
Attaching the product to your elbow
• The attachment steps below use the
right arm for reference. Follow the same
attachment steps for the left arm.
1.
Make a loop with the temporary
fastening strap.
Put the ice bag into the ice bag pocket in
the icing wrap, and make a loop with the
temporary fastening hook-and-loop fastener
by attaching one end of it to the outside of the
icing wrap.
2.
Insert your arm and position the ice
bag against the area you want to
cool.
Insert your arm into the loop that you made in
step 1, and slide the product up your arm so
that the ice bag is on the part of your elbow
you want to cool. If the icing wrap becomes
misaligned, adjust the temporary fastening
strap.
* If you have difficulty inserting your arm into
the loop, place the icing wrap on the desired
area first, then attach the temporary fastening
strap as shown in the illustration.
3.
Wrap the straps.
Pull and wrap straps A and B one at a time
on either side of the ice bag cap, and fasten
hook-and-loop fasteners A and B to the
surface of the icing wrap.
4.
Make sure that the icing wrap is
not loose or misaligned. If you feel
any discomfort, repeat the steps
from the beginning to reattach the
product.
The product correctly fastened
<For right arm>
EN
CA
ES
FR
IT
NL
DE
IW-1 SET 3