ZAMST IW-1 SET Gebrauchsanleitung Seite 5

2.
Wrap the straps.
Strap B
Pull and wrap straps A and B one at a time
on either side of the ice bag cap, and fasten
hook-and-loop fasteners A and B to the
surface of the icing wrap.
3.
Make sure that the icing wrap is
not loose or misaligned. If you feel
any discomfort, repeat the steps
from the beginning to reattach the
product.
The product correctly fastened
<When attached <When attached
to knee> to thigh>
Attaching the product to your ankle
• The attachment steps below use the
right ankle for reference. Follow the same
attachment steps for the left ankle.
1.
Make a loop with the temporary
fastening strap.
Temporary fastening strap
Strap A
<When attached
to lower leg>
Put the ice bag into the ice bag pocket in the
icing wrap and attach it to the part of your
ankle you want to cool. Wrap the temporary
fastening strap around the bottom of your
foot, pull it, and attach the temporary fastening
hook-and-loop fastener to the icing wrap.
If the temporary fastening strap feels
excessively tight, you do not need to attach
it. If you are not using the temporary fastening
strap, fasten the temporary fastening hook-
and-loop fastener to the napping fabric for the
temporary fastening strap.
2.
Wrap the straps.
Strap B
Strap A
Pull strap A and wrap it once around your foot,
then attach hook-and-loop fastener A. Then,
pull strap B and wrap it once around your
ankle and attach hook-and-loop fastener B.
When doing so, straps A and B are attached
on either side of the ice bag cap.
3.
Make sure that the icing wrap is
not loose or misaligned. If you feel
any discomfort, repeat the steps
from the beginning to reattach the
product.
The product correctly fastened
<For right foot>
EN
CA
ES
FR
IT
NL
DE
IW-1 SET 5