ZAMST IW-1 SET Gebrauchsanleitung Seite 6

How to apply IW-2
• Before attaching this product, carefully read through the "Precautions for use - Be sure to read
this" section. Then follow the steps provided to ensure the product is correctly attached.
How to set the ice bag
1.
Unfasten all the hook-and-loop
fasteners of the icing wrap. Confirm
the top/bottom and inner/outer
sides of the product.
Finger hole Ice bag cap hole
<Outside of the product>
Tag
Ice bag
pocket
<Inside of the product>
The side with the tag on the back of the
icing wrap should be placed in contact
with your body.
2.
Set the ice bag.
Ice bag
cap hole
Put the ice bag containing ice inside the
ice bag pocket from the back side of the
icing wrap while inserting the ice bag cap
into the ice bag cap hole.
6 IW-2 SET
Elastic strap
Hook-and-loop
fastener
3.
Put the ice bag(s) inside the ice bag
pocket and pull it into shape.
● Cooling the center of your lower back
or shoulder
● Cooling the front and back of your
shoulder at the same time
● Cooling your entire shoulder
● Cooling the front side of your shoulder
● Cooling the back side of your shoulder