TP-Link TL-R480T+ V4 Installationshandbuch Seite 9

Power On
Via Power Cord/Power Adapter
■
Connect your device to the power source via the power
cord/power adapter.
Via Standard PoE Device (If Supported)
■
Connect an Ethernet cable from the ETH1 (PoE IN) port of
your device to a standard 802.3af or 802.3at or 802.3bt PoE
device, such as a TP-Link PoE switch.
Via USB Power Source (If Supported)
■
Connect a USB cable (not provided) from the micro USB
port of your device to the USB power source.
2
1
5
English