Werbung
EN © mPTech. All rights reserved.
MS2303/MS2303e
To set up a new eSIM profile, you will need to enter a special QR code
you receive from your carrier, which you can scan with a QR code
scanner or enter manually by going to the [Need help?] tab while
scanning.
After scanning or entering the code, the card's profile will download
automatically.
Once the profile is downloaded, [Menu] > [Settings] > [Mobile
Network/eSIM] will show a tab with the name of the operator and
eSIM signature, and a network coverage icon in the top status bar.
You can also see the process of launching and activating an eSIM card
on the page linked below:
8.2 Disabling and deleting the profile
To disable the eSIM card's profile, go to [Settings] > [Mobile
Network/eSIM] > [eSIM card's operator name] expand advanced
options, then in the [Operator] tab go to the settings icon and select
Disable/Enable. Once the card is disabled, the coverage icon will
disappear from the top bar.
To remove the selected eSIM card profile completely, select Delete.
If you don't want to use the eSIM function at all and your preferred
configuration is, for example, to have 2 regular SIM cards, for this you
need to remove the eSIM card and put one of the standard nano-
sized SIM cards in its place.
30
Werbung
