Beatbot iSkim Ultra Bedienungsanleitung Seite 9

7 Network Configuration
APP Download
You can either scan the QR code below or search for "Beatbot" in the App Store or
Google Play to download the latest version of the APP.
Robot Connection
Please check the following items before connecting:
Make sure the robot is turned on;
Confirm that both your mobile phone and the robot are within the same Wi-Fi
coverage range with a strong signal;
Ensure your phone is connected to Wi-Fi, supporting only the 2.4GHz network;
Bring the phone close to the robot (the distance between your phone and the
robot should be within 1m).
Activate Device's Hotspot:
Press and hold both the "Power" and "Action" buttons simultaneously for about
3s, and when you see the indicator flashing blue, the robot is ready for network
setup.
Connect the Robot:
You can choose either of the following methods to complete the connection.
A. Add via Bluetooth: Make sure that the bluetooth of your mobile phone is turned on before
connection. Tap the "Add Device" on the home page of the APP, it will automatically search for
your robot model and follow the APP instructions to complete the connection.
B. Scan to Add: Tap the "Scan to Add" on the home page of the APP, aim the camera at
the QR code on the robot, and follow the APP instructions to complete the connection.
C. Add Manually: Tap the "Add Device" on the home page of the APP, choose your robot
model, and follow the APP instructions to complete the connection.
A
B
OR
7
C
OR
EN