Beatbot iSkim Ultra Bedienungsanleitung Seite 14

9 Maintenance and Replacement
Ensure that the robot is disconnected from the power before performing maintenance.
Filter Basket
Clean the basket every 2-3 days or as needed based on its dirtiness of it to maintain opti-
mal working efficiency.
Press the filter basket switch to remove the basket.
Open the buckle and empty the debris.
Rinse the basket thoroughly. Then, close the buckle and reinsert it into the robot.
Ensure proper installation by listening for a "click".
1
EN
Tips
Solar Panel
Clean the solar panel by using a hose or a soft, dry cloth to remove any residue.
Tips
2
1. When retrieving the robot from the water, you can either use the
remote control to guide it manually or wait until it reaches the pool's
edge. Ensure you can safely approach the robot, then gently lift it out of
the water surface with both hands, and proceed to remove the filter
basket.
2. For persistent algae, use a brush for cleaning.
3. When lifting the robot with one hand on the front handle, avoid
touching the switch accidentally.
1. Avoid using high-pressure washers or any tools that may scratch the
panel surface while cleaning the robot.
2. Be careful not to bump or scratch the solar panel while moving.
3. When solar panel is exposed to prolonged intense sunlight, the
surface temperature increases. Do not touch directly.
3
12