Fronius VR 5000 Remote Installation Seite 9

Installing the Steel / Steel US / Yard control pa-
nel in the VR 5000 Remote
Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current.
An electric shock can be fatal.
▶
▶
▶
▶
Danger from electric current and risk of injury from the emerging wire elec-
trode.
This can result in serious injury and damage to property.
▶
▶
▶
Risk of scalding by hot system components.
This can result in severe scalds.
▶
WARNING!
All the work and functions described in this document must only be carri-
ed out by trained and qualified personnel.
Read and understand this document.
Read and understand all documents relating to the system components,
especially the safety rules.
WARNING!
Before starting work: Turn the welding machine mains switch to the "O"
position
Disconnect the welding machine from the mains
Ensure that the welding machine remains disconnected from the mains
until all work has been completed
After opening the device, use a suitable measuring instrument to check
that electrically charged components (e.g. capacitors) have been dischar-
ged.
WARNING!
Before starting work: Turn the mains switch of the unreeling wire-feed unit
to the "O" position
Disconnect the unreeling wire-feed unit from the mains
Ensure that the unreeling wire-feed unit remains disconnected from the
mains until all work has been completed
CAUTION!
Before starting work, allow all hot system components to cool down to
room temperature (+25 °C, +77 °F). For example: coolant, water-cooled
system components, wire-feed unit drive motor
English
9