Troubleshooting; Adjusting The Lower Parts Of The Pliers - Pro’s Pro Combat Bedienungsanleitung

Operating instructions
for
pro's pro® COMBAT

TROUBLESHOOTING

Adjusting the lower parts of the pliers

If you do not fix the base on the rail, it must be adjusted. To do this, proceed as
follows:
1. Position the lower part of the pliers vertically to the rail.
2. Insert a 3mm Allen key into the hole provided as shown.
3. If the lower part of the pliers cannot be easily pushed onto the rail, turn the Allen key slightly to the left. If the lower part of the pliers
cannot be fixed in place, turn the Allen key slightly to the right
4. Do not use too much force!
.
5. If the lower part of the pliers cannot be moved
at all, move the lever to the middle position. If
there is too much play in the lever, turn the
screw slightly to the right. If the clearance is
too small, turn it to the left.
6. Then remove the Allen key and try to fix the
lower part of the pliers on the rail. If this is not
possible, repeat the process.
page 8 from 11