Inserting The String & Stringing - Pro’s Pro Combat Bedienungsanleitung

Operating instructions
for
pro's pro® COMBAT
Inserting the string & stringing
Use the central adjustment screws to adjust the position of the support arms and the side arms according to the racket shape. The racket
must be enclosed by the frame fixings and the heart head fixings. CAUTION: Do not apply too much force, as this could damage the
racket!
Now set the desired weight.
The desired stringing weight can be read off the scale below the weight on the side facing the machine (see arrow).
There are 2 scales (the higher one for reading the stringing weight for stringing tennis rackets, the one with the lower values for reading
the stringing weight for stringing badminton rackets - the weight must be divided when stringing badminton rackets)!
Place the quick-release lever in a horizontal position and the lever arm slightly above it. Place the string in the quick release and press the
jaws together slightly. Now lift the lever arm slightly and release it carefully so that it drops down slightly. When lifting the lever arm, the
quick release must be held with the other hand so that it does not move upwards synchronously with the lever arm. Repeat lifting the arm
until it remains in the horizontal, i.e. marked, position by itself (IMPORTANT Under NO circumstances should you push the lever arm
down! It may only fall down due to gravity).
Once the desired weight has been reached (see red arrow), clamp the string with the pliers and return the lever arm to its original position
with the quick release.
. page 6 from 11