Important Safety Precautions - Wanbo T6R Max Benutzerhandbuch

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please visit our customer support page: www.alza.cz/EN/kontakt.
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Important Safety Precautions

You are recommended to use the projector in a dark room to achieve the best effect.
Do not install in places that are directly blown by cold and warm air of air-
•
conditioning, water condensation, or high temperature, as that may lead to
failure to the device.
Ensure adequate ventilation and ensure that vents are not blocked to prevent
•
heat accumulation inside the device.
Prevent foreign materials such as nails or paper scraps from falling into the
•
device. Do not insert any metals such as iron wires or screwdrivers into the
device. Turn off the power immediately and turn to professional technician to
remove it if any foreign matters fall into the body.
Do not place any liquid on this device to avoid risk of electric leakage.
•
Use soft packaging materials to move the projector, install lens protection cover
•
to protect the lens from scraping, in addition, keep the projector from violent
vibration.
Areas near the exhaust will become hot during and after use of the projector, it
•
may lead to scald if touched.
Do not watch lens directly when the projector is on so as to protect your eyes
•
from damage.
Notes:
Do not open the cover of the device to prevent electric shock. Turn to qualified
•
professional maintenance personnel for the maintenance as there are no parts in
the projector that users can repair themselves.
Do not expose the projector to rain or moisture so as to prevent misfire or
•
electric shock.
3