Blaupunkt Bluebot XSMART Kurzanleitung Seite 25

w•r-l APP
Step 6: After completing step 5, if the robot is connected and logged in to the cloud server successful y, the APPwill
jump to Devices page. Then you can see the connected robot in the devices list.
WiF
Note: If an error occurs, you can switch off the robot, quit the APP.Then turn on the robot again and ong pressthe
"HOME" button on robot, until its LED panel disp ays " SUCC" to disconnect the robot, then retry the connection
from Step 4 to 6.
Check the status of your Bluebot XSMARTrobot
5.
You can check the robot status at the devices list, including the robot connect status (online / offline), work status
A.
(working, pause,etc.), and battery capacity.
You can press " + " to connect another robot, or press
B.
checking of the robot status by pulling down the page.
CONNECTING
BlueBot
Registering•••
BlueBot
INSTRUCTION
BlueB0t
Account
Pause
- to disconnect your robot from the APP.You can refresh the