two trees SK1 Bedienungsanleitung Seite 5

Power cord X1 Cleaning needle X1
Cleaning brush X1 Flash drive X1
05
ADAPTER v2 USB 3.0 Card reader
3. Fixed and removed
Remove XY rail fasteners and screws
Note: After removing the fasteners, pushing the print head to check whether the slide is smooth is a very
important step to ensure the normal operation of the printer
Before connecting the power supply, be sure to check the voltage mode
according to the local grid voltage to avoid burning out the power supply.
If the local grid voltage is in the range of 100-120V, please use a screwdriver
to dial the machine's power supply voltage to 110V.
If the local grid voltage is in the range of 100-240V, please use a screwdriver
to dial the power supply voltage of the machine to 220V.
EN
06