How To Install In Noah For Direct Access To The Software Suite; Noah 3; Noah 4; How To Install A Shortcut For Launching With Standalone Version - Interacoustics Callisto Gebrauchsanweisung

Callisto™ Instruction for Use - GB
Sound Device Settings for Windows®XP:
In the "Start" menu find the "Control Panel" and select "Sound and Audio Devices". In the "Audio" tab make
sure to reset your sound playback/recording settings to the original default device. In this case "Conexant HD
Audio output".
2.7

How to Install in Noah for direct access to the Software Suite

2.7.1

Noah 3

If you are using HIMSA'S Noah3 Office System and you want a button shortcut for the installed module,
please follow these steps.
1. Start Noah3
2. Go to the menu item "Tools"
3. Select "Module buttons"
4. Choose one of the two available buttons and select the software name in the drop down list.
5. Press "OK" and your module will be launched when the appropriate button gets pushed.

2.7.2 Noah 4

If you are using HIMSA's Noah4 Office System,, the Callisto software will install itself automatically in the
menu bar on the Noah4 start page, along with all the other software modules.

2.8 How to install a shortcut for launching with standalone version

If you do not have Noah on your computer you can make a shortcut for direct launching of the software suite
as a stand-alone module.
You can find the executable file (.exe) for this purpose through the following path start/All
Programs/Interacoustics/Suite for Callisto™ Suite Launcher. Right click on the last item with the mouse and
select "Create shortcut".
However, you will not be able to save your tests and measurements when using this way of working.
Page 24