EN
TROUBLESHOOTING
PROBLEM
The mower or self–propel
function fails to start.
The mower cuts unevenly.
The mower does not
mulch properly.
16
56 VOLT LITHIUM-ION CORDLESS MOWER — LM2230E-SP
CAUSE
◾
The battery pack charge is depleted.
◾
The battery pack is not properly inserted into
the battery compartment.
◾
The handle is not locked in an operating
position and the mower status indicator
flashes green.
◾
The mower deck is clogged with grass and
debris.
◾
The blade set is dull.
◾
The grass-cutting height is not set properly.
◾
The blade set is installed incorrectly.
◾
The blade speed mode is not set properly.
◾
Wet grass clippings are sticking to the
underside of the deck.
◾
The mower is set to cut too much grass at
once.
◾
The blade speed mode is not set properly.
SOLUTION
◾
Charge the battery pack.
◾
Insert the battery pack into
battery compartment until you
hear a "click".
◾
Stop the mower and make sure
that the handle is locked in one
of the operating positions.
◾
Clean the mower deck and
ensure that the blade set has
freedom of movement.
◾
Sharpen or replace the blade set.
◾
Move the deck height to a higher
setting.
◾
Re-install the blade set, following
the section "REPLACING THE
BLADE SET" in this manual.
◾
Select a proper blade speed
mode.
◾
Wait until the grass dries before
mowing.
◾
Raise the deck to a higher
cutting-height setting.
◾
Select the blade speed to a
lower setting.