Powerfix Profi 311845 Bedienungs- Und Sicherheitshinweise Seite 19

– with end fittings and tensioning devices: deformations, cracks,
pronounced signs of wear, signs of corrosion . Only lashing
straps bearing identification labels shall be repaired . If there is
any accidental contact with chemical products, the lashing strap
must be removed from service and the manufacturer or supplier
consulted .
9 . Care should be taken that the lashing strap is not damaged by the
sharp edges of the load on which it is used . Regular visual inspection
before and after each use is recommended .
10 . Only legibly marked and labelled lashing straps may be used .
11 . Lashing straps must not be overloaded: The maximum hand force of
250 N (25 daN on the label; 1 daN ≈ 1 kg) may be applied with
only one hand . Mechanical aids such as bars or levers etc . may not
be used unless they are part of the tensioning device .
12 . Lashing straps may not be used when knotted .
GB 17