Werbung
6. Brake adjustment method
(1) Adjusting the brake lever:
- If there is too much travel on the brake, it requires tightening.
- Loosen the white nut (d) on the brake lever by turning it anticlockwise, which tightens
the brake.
(2) Adjusting the brake disk nut:
- If the brake still has excessive travel after the lever adjustment, you should focus on
the nut (e) near the brake disk.
- Loosen the nut (e) by turning it anticlockwise, which tightens the brake.
(3) Adjusting the brake cable:
- If even after the above adjustments, the brake still has too much travel, you need to
check the nut of the brake cable (f).
- Turn the nut of the brake cable (f) anticlockwise to loosen it.
- Tighten the brake cable while holding it in place. Rotate the wheel to assess the level
of tightness.
- When you start to feel a slight friction on the wheel, turn the nut of the brake cable (f)
clockwise to tighten it.
Werbung
