Werbung
Place the front wheel
into the front fork, as shown in the picture. Insert two washers
(B) on each side, then secure the front wheel by tightening two nuts (C) using the open
spanner
.
Open spanner
4.Handlebar assembly
Position the handlebar
g device B
over the four holes on the car body. Insert the
handlebar
into place. Attach handlebar
g device A
and insert four M8*45
screws
. Tighten them using the Z-type he wrench
.
To complete the connection, connect the two plugs from the car body and the
handlebar
.
6
Werbung
