fillikid Filliboard Wide SET Bedienungsanleitung Seite 11

EN
Operating Instructions
Adjust tot he siutable wigth
Adjust the connector base tot he suitable width.
! Caution ! Both sides are must in the equal distance.
Attach the connector base
Place the connector hook on the connector strap loop.
Press forward to click into the connector button groove to
complete.
! Caution !
Ensure that your stroller is capable of bearing the load
created by the board and extra child. Weak tubes or axles
may bend or break under excessive loads.
Adjust tot he siutable length
Adjust the length oft he connector base
Adjust tot he siutable angle
Looose the angle adjuster, adjust and tighten until the
main board is fixed in a flat position.
! Caution! Ensure the main board is fixed in a flat position.
If not, move the board slightly forward, and the suspension
system will balance the board once your child steps upon
it.