Troubleshooting; Eu Declaration Of Conformity - Riwall Pro Repw180Set Originalbetriebsanleitung

17 Troubleshooting

Fault
Product does not run.
Product has no pressure.
Heavy pressure fluctuations. Nozzle dirty or clogged.
Leak in the water system.

18 EU Declaration of Conformity

Translation of the original Declaration of Conformity
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
We declare under our sole responsibility that the product
described here complies with the applicable directives
and standards.
Brand: RIWALL PRO
Art. designation: HIGH-PRESSURE CLEANER –
REPW180SET
Item No. 3907729934
EU directives:
2014/30/EU, 2006/42/EC, 2000/14/EC_2005/88/EC,
2011/65/EU*
* The object of the declaration described above fulfils the
regulations of the directive 2011/65/EU of the European
Parliament and Council from 8th June 2011, on the re-
striction of the use of certain hazardous substances in
electrical and electronic equipment.
2000/14/EG_2005/88/EC – Appendix: V
Guaranteed sound power level (L
Measured sound power level (L
Applied standards:
EN 60335-1:2012+A11+A13+A1+A14+A2+A15;
EN 60335-2-79:2012; EN 62233:2008;
EN 55014-1:2021; EN 55014-2:2021;
EN 61000-3-2:2019+A1; EN 61000-3-11:2019
26 | GB
Possible cause
Product switched off.
switch switched off.
Damaged mains connection ca-
ble.
Faulty power supply.
Water supply line pressure drop. Check the water supply.
Connections not fitted correctly.
): 94 dB
WA
): 92 dB
WA
Remedy
On/off Switch the product on with the On/Off switch.
Switch the product off and disconnect from the mains.
Check for mains connection cable for damage.
If necessary, have the mains connection cable re-
placed by an authorised specialist.
Check the electrical system for compliance with the
specifications on the type plate.
Rinse the nozzle with water. If necessary, clean the
nozzle bore with the nozzle cleaning needle.
Switch the product off and disconnect from the mains.
Connect the product to the water lines again.
Documentation authorised representative:
Georg Kohler
Günzburger Str. 69
D-89335 Ichenhausen
Ichenhausen, 19.11.2024
Simon Schunk
Division Manager Product Center
Andreas Pecher
Head of Project Management