Werbung
WF-CD77H/E
CP-CD77
CD
SECTION
• Setting
the TEST Mode
(Refer to Fig. 16-1)
Pressing
CALL button
and CLEAR button
the
selector
switch
to
CD.
appears for 1.5 sec, and "TEST MODE O" (I) is indicated.
Then
once press the PLAY button.
I" (2) is indicated, and the laser lights.
If the PLAY button is pressed again, "TEST MODE 2" (3) is
indicated, and Focus starts {Focus Servo On).
When the PLAY button is pressed (third time), "TEST MODE
3" (4) is indicated, and the spin motor starts (Spin Servo On).
When the PLAY button is pressed (fourth time), "TEST MODE
4" (5) is indicated, and Tracking Servo is turned on.
When
the PLAY button
time are indicated
(6).
The sixth key input and subsequent key inputs are not accepted.
When
the STOP button
resulting
in Stop state. In this case the pickup
and "TEST
MODE
0" is indicated.
While the FAST FORWARD (REWIND) button is pressed, the
pickup
slides
to outward
executed,
the test mode indication
Caution:
The
above-mentioned
unless the CD cover open-close
simultaneously,
As a result
the
whole
indication
As a result "TEST MODE
is pressed
(fifth time),
track
is pressed,
pertinent
operation
does not slide,
(inward).
While
this
operation
does not change.
TEST
Mode
cannot
switch
is set to ON.
set
No. and
stops,
is
be
set
-18
TEST
VODE
O
TEST
VODE
1
TEST
VODE
2
TEST
VODE
3
TEST
4
TEST
5
Figure
18
1 TEST MODE
(9
6
Werbung
