Fixing The Frame - Panasonic KH-TX65CB Bedienungs- Und Installationsanleitung

Installing the Appliance
Island
(fig. 1)
1
2
20
EN

Fixing the Frame

Should it be necessary to adjust the height of the
frame, proceed as follows:
■ Unfasten the metric screws joining the two opposite
parts that can be seen from the front.
■ Adjust the height of the frame as required, then
replace the screws removed as above, making
sure that you insert 2 of them close to the panel
connector (fig. 1).
■ Lift the frame, insert the slots onto the screws and
slide them until they lock.
■ Tighten the two screws and insert the other two
screws provided.
■ Take the telescopic chimney fixing bracket (Ref.
7.2), remove the film from the double sided adhesive
and fix it inside the frame so as to hold it more firmly.
Before final locking of the screws it is possible to make
small adjustments to the frame, making sure that the
screws do not come out of the adjustment slot.
1
■ The frame must be securely fastened both due to
the weight of the appliance and the stress caused
2
by occasional sideways pressure when in position.
When fastened, check that the base is stable even
when the frame is subjected to bending.
■ In all cases where the ceiling is not sufficiently
strong at the point of suspension, the installer must
strengthen it with suitable plates and counterplates,
anchored to structurally sound elements.