Mounting The Hood Body; Island And Wall Mounted; Ducted Mode Air Exhaust System - Panasonic KH-TX65CB Bedienungs- Und Installationsanleitung

Installing the Appliance
Wall Mounted
12a

Island and Wall Mounted

ø 150
22
EN

Mounting the Hood Body

Before attaching the hood body, tighten the two screws
Vr
Vr located on the hood body mounting points.
■ Hook the hood body on to the screws (Ref.12a).
■ Fully tighten the support screws (Ref.12a).
■ Adjust the screws (Ref. Vr) to level the hood body.
■ If necessary, it is possible to fasten the appliance to
the wall using more screws with wall plugs, which
can be positioned from inside the hood canopy.

Ducted Mode Air Exhaust System

When installing the ducted mode, connect the hood to
the chimney using either a flexible or rigid pipe ø 150
ø 120
or 120 mm, the choice of which is left to the installer.
9
■ To install a ø 120 mm air exhaust connection, insert
the reducer flange (Ref. 9) on the hood body outlet.
■ Fix the pipe in position using sufficient pipe clamps
(not supplied).
■ Remove charcoal filters if present.