Installing the Appliance
Island and Wall Mounted
Island
12c
7.3
14.1
14.1
15
7.3
12e
Wall Mounted
12b
14.1
7.3
14.1
15
ø 150
Island
Recirculation Mode Air Outlet
■ Insert the connector extension (Ref. 14.1) into the
side of the connector (Ref. 15).
■ Insert the connector (Ref. 15) into the fixing bracket
(Ref. 7.3) and fix it with a screw.
■ Make sure that the outlet of the extension pieces
(Ref. 14.1) is horizontally and vertically aligned with
the chimney outlets.
■ Connect the air outlet connector (Ref. 15) to the
hood body outlet using either a flexible or rigid pipe
ø 150 mm, the choice of which is left to the installer.
■ Insert charcoal filters (purchased separately).
Application of Novastick Tape
■ Apply the Novastick tape (Ref. 16) to the front edge
of the upper chimney from the top part down to the
start of the lower chimney.
23
EN