Creality Falcon2 Benutzerhandbuch Seite 7

Assembly Instructions
Install four raiser stands (including pads). There are 3 positions for installation at each of
the four corners of the machine, to suit different size of workbenches. Pay attention to
symmetry when installing the stands.
Note: The other four raiser stands (without pads) can be used to raise the machine. You
can stack them if necessary.
Connect the machine with the air pump. Unplug the rubber plug in the air nozzle of the
air pump and connect the silicone tube from the machine to the air nozzle of the air
pump.
7