Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Capero
| Lightweight rollator
4.3. Contents
After receiving the goods, please check the contents for completeness
right away. The content consists of:
•
Outer package
•
Rollator pre-assembled
•
Instruction manual
•
Bag
4.4. Summary
Product overview Capero (Fig. 2)
Handles
Brakes
Back strap
Handle tube
Seat
Bag
Cane holder
Steered wheel
Fixed wheel
34
5.
Assembly/adjustments
5.1.
•
Position the rollator in the travel direction.
•
Release the locking brakes (see sec. 5.5.).
•
Press the frame tubes of the seat downward to unfold the rollator
(Fig. 3). Make sure the tubes are aligned properly and snap into
place.
5.2.
•
Activate the locking brakes.
•
Hold the rollator firmly with one hand on the handle. With your
other hand pull the grip on the seat upward (Fig. 4).
•
When doing so you must overcome the resistance of the locking
device.
5.3.
•
The rollator is unfolded. Activate the locking brakes.
•
Position yourself against the travel direction in front of the rollator.
•
The bag can be inserted from above in the guide rails on the left
and right on the rollator (Fig. 5).
5.4.
•
Now adjust the push handles so that they are located at the height
of your wrists. Select the nearest hole in the push tube.
•
The rollator is unfolded. Activate the locking brakes.
•
Hold the push handle firmly with one hand. With the other hand,
activate the locking device (Fig. 6).
•
Move the push handle to the desired height until it latches audibly.
•
Repeat this procedure on the other side.
•
Check to make sure that both the push handles are at the same
height.
The push handles can also be removed with this procedure. To do so,
2.
press the pushbutton and pull the push handle up and out.
Bischoff & Bischoff GmbH | 2024-11-05 Rev. 3
Lightweight rollator |
Unfolding
Folding
Attaching the bag
Adjusting the push handles
Capero
3.
4.
5.
6.
35
Werbung
