Schedule Timer Operation - Panasonic CZ-02RT11P Betriebsanleitung

ADDITIONAL FEATURES OF THE CONTROLLER
1 LEAVE HOME
Press the
simultaneously to enable the LEAVE HOME function.
KEEP IN MIND THAT THE
MUST BE OFF
TRIGGERING OF THE LEAVE HOME
FUNCTION.
2 Adjusting the air flow direction
Use the button to adjust the air flow direction.
Press the button to switch between fixed or variable
air flow direction. Use the
fixed air flow direction by pressing the
when the icon indicates the desired direction.
NOTE Even if fixed air flow direction is selected,
variable air flow direction can be enabled
automatically
operation of your installation.
3 SCHEDULE TIMER
All features and operation and programming of the
schedule timer are described below.

Schedule timer operation

In schedule timer operation, the installation is also
controlled by the schedule timer. The actions
programmed in the schedule timer will be executed
automatically.
The schedule timer always executes the last
command; this means the user can temporarily
overrule the last executed programmed action. Refer
to "Manual operation" on page 5. The next
programmed action (in the schedule timer) will return
control to the schedule timer.
Use the button to enable or disable the
schedule timer.
CZ-02RT11P
Remote controller
4PW15515-1
and buttons
BUTTON
TO GUARANTEE
icon to determine the
button
to preserve proper
NOTE
The schedule timer overrules the
button, only use the
enable or disable the schedule timer. The
schedule timer is enabled when the
icon is visible. The
overrules the schedule timer until the next
programmed action.
The programmed schedule is time driven.
Make sure that the clock and day of the week
are set correctly. Refer to "CLOCK SETTING
FUNCTION" on page 4.
Manually adjust the clock for summertime
and wintertime. Refer to "CLOCK SETTING
FUNCTION" on page 4.
A power failure exceeding 1 hour will reset
the clock and the day of the week. Refer to
"CLOCK SETTING FUNCTION" on page 4
to adjust the clock and the day of the week.
The actions programmed in the schedule
timer will not be lost after a power failure;
reprogramming the schedule timer is not
required.
To set up the SCHEDULE TIMER refer to chapter 6.
"Programming the schedule timer" on page 10.
button to
button only
Operation manual
7