Panasonic CZ-02RT11P Betriebsanleitung Seite 5

12 MAXIMUM SET TEMPERATURE
The maximum set temperature
maximum set temperature when in limit operation.
13 MINIMUM SET TEMPERATURE
The minimum set temperature indicates the minimum
set temperature when in limit operation.
14 SCHEDULE TIMER ICON
This icon indicates that the schedule timer is enabled.
15 ACTION ICONS
These icons indicate the actions for each day of the
schedule timer.
16 OFF ICON
This icon indicates that the OFF action is selected
when programming the schedule timer.
17 INSPECTION REQUIRED
These icons indicate that inspection is required.
Consult your installer.
18 SET TEMPERATURE DISPLAY
This indicates the current set temperature of the
installation (not shown in LIMIT operation or in FAN or
DRY mode).
19 SETTING
Not used, for service purposes only.
20 AIR FLOW DIRECTION ICON
This icon indicates the air flow direction (only for
installations with motorised air flow flaps).
CZ-02RT11P
Remote controller
4PW15515-1
21
indicates the
is addressed or a function is not available.
22
This icon indicates the set fan speed.
23
This icon indicates that the defrost/hotstart mode is
active.
24
This icon indicates the air filter must be cleaned.
Refer to the manual of the indoor unit.
25
This icon indicates the element must be cleaned
(
and
26
The ventilation mode button operates the
to the
27
This button sets the ventilation amount; refer to the
manual for more details.
28
Not used, for service purposes only.
29
This button is a multi-purpose button.
Depending on the previous manipulations of the user,
the programming button can have various functions.
NOT AVAILABLE
is displayed whenever a non-installed option
FAN SPEED ICON
DEFROST/HOTSTART MODE ICON
AIR FILTER CLEANING TIME ICON
ELEMENT CLEANING TIME ICON
only).
VENTILATION MODE BUTTON
manual for more details.
VENTILATION AMOUNT BUTTON
INSPECTION/TEST OPERATION BUTTON
PROGRAMMING BUTTON
; refer
Operation manual
3