General Application Instructions - Hbk C2 Montageanleitung

4

GENERAL APPLICATION INSTRUCTIONS

Force transducers are suitable for measuring compressive forces. They provide highly
accurate static and dynamic force measurements, and must therefore be handled very
carefully. Particular care must be taken when transporting and installing the devices.
Dropping and knocking the transducer may cause permanent damage.
C2 series force transducers have a convex force application part, to which the forces to
be measured must be applied.
The permissible limits for mechanical, thermal, and electrical stress are listed in Sec­
tion 10 "Specifications", page 55. It is essential to observe these limits when planning the
measurement set-up, during installation, and in ultimate operation.
C2
11
GENERAL APPLICATION INSTRUCTIONS