Scope Of Supply, Configurations & Accessories; Scope Of Supply; Configurations - Hbk C2 Montageanleitung

3 SCOPE OF SUPPLY, CONFIGURATIONS & ACCESSORIES
3.1

Scope of supply

S
C2 force transducer
S
Quick Start Guide for C2
S
Test report
3.2

Configurations

All force transducers are available in different versions. The following options are avail­
able:
1. Nominal (rated) force
The C2 force transducer is available with the following nominal forces (measur­
ing ranges):
500 N
1 kN
2 kN
5 kN
10 kN
20 kN
50 kN
100 kN
200 kN
2. Electrical connection
Different cable lengths between 1 m and 20 m and two M12 connectors fitted directly
on sensors are available. M12 8-pin male connectors or fixed cables can be ordered
for passive sensors. M12 4-pin male connectors (IO-Link output) and M12 8-pin male
connectors (current and voltage output) are available for active sensors.
M12 8-pin male connector,
A-coded (current, voltage output or passive)
M12 4-pin male connector, A-coded (IO-Link output)
Fixed cable (1 m) (passive)
Fixed cable (3 m) (passive)
Fixed cable (6 m) (passive)
Fixed cable (12 m) (passive)
Fixed cable (20 m) (passive)
8
Code 500N
Code 001K
Code 002K
Code 005K
Code 010K
Code 020K
Code 050K
Code 100K
Code 200K
Code 00A8
Code 00A4
Code 01M0
Code 03M0
Code 06M0
Code 12M0
Code 20M0
SCOPE OF SUPPLY, CONFIGURATIONS & ACCESSORIES
C2