FLINQ Smart Outdoor Christmas Tree Luminus Handbuch Seite 7

Manuel
EN
Install your Luminus Tree with stand 2/2
Connect string lights to stand
8
Connect the string lights to each end of
the ground stand by using the hanging
ring as shown in the picture above.
Note: In heavy weather such as rain, wind and thunder, we recommend
strengthening the base / groundstand by placing a tile or heavy bag of sand.
L R
Connect the Velcro bands
9
As you can see there are several Velcro
bands added already. These Velcro
bands should be fi xed (closed) from
top to bottom and from left string to
right string. Secure the strings with the
remaining Velcro bands to each other
with the LEFT and RIGHT labels added
together (so left to right and left to right
etc) and the light strings are secured.
Make sure the ropes and light chains are
in the correct position before fastening
them to the already placed ground stand.
Do this in a sequence of securing the
2 opposite each other to raise the 3D
eff ect.
FlinQ Smart Outdoor Christmas Tree Luminus