FLINQ Smart Outdoor Christmas Tree Luminus Handbuch Seite 10

Manuel
EN
Remote control
First install 2x AAA (LR03/(H)R03/UM4) 1,5V batteries (not included, optional). To
open the battery cover at the back side just slide it downwards to have it opened.
Clean the battery contact and remote contacts before installing the batteries. Install
the three batteries 1 by 1 and make sure to use the correct polarity + and – inside
the remote control housing. Put the battery cover back into its place and make sure
that all sides are correctly "clicked" and pushed inside the housing of the remote top
housing.
The RF remote can be used for the change of colors, dimming the light, timer, function
controls and more. The remote control is not waterproof! The maximum control
distance is <25 meters without obstacles. It does not needs to be pointed to the Tree
lamp itself to work correctly.
If you need to replace the battery, take out the battery and push the battery out from
the top or bottom side. The batteries can be removed easy.
Note: Remove the batteries from the product if it will not be used for a long time
(1 month or longer) or when the remote control is not working anymore (replace
when needed).
Note: If need to re-pair the RF remote control when remote should not work
correctly please remove the adapter from the power outlet en insert again after 10
seconds. Then (within 20 sec) press and hold the ON/OFF button for 3-5 seconds to
re-pair it again and the light will fl ash 3x times slowly. Tip: when RF remote pairing
is deleted by pressing the ON/OFF button for 3-5 seconds the light will fl ash 3x
times quickly.
On / Off
Short press to make the Tree light ON or
OFF, Long press 5 seconds to have the RF
pairing / clearing remote control
Reset
Press and HOLD for up to 10 seconds to
have the Tree light in "pairing mode/ WIFI
RESET" as described in next section (all
leds fl ashing quickly)
FlinQ Smart Outdoor Christmas Tree Luminus
Light Button
Short press the color button with your
fi nger to select the desired color white or
RGB colors
Speed / color temperature
When in symphonic mode or color mode
you can increase the speed of the light.
Brightness - / +
The brightness can de decreased /
increased
Color mode - / +
Several moving and special mode's/
colors etc can be selected downwards /
upwards.
Microphone - / +
Microphone sensitivity less or more
Music
ON or OFF to use the microphone
function for adding extra rhythm changes
according the music or sound of the
scene (by app or built-in microphone in
the top of the Tree light module).
Timer
Timer function for 1-2-4-8 hours max
Light speed
Light speed adjustment when used on
color mode