FLINQ Smart Outdoor Christmas Tree Luminus Handbuch Seite 5

Manuel
EN
Install your Luminus Tree with groundpin 2/2
Connect 3m pole to the groundpin
8
1 person is holding the 5 wires which are still partly in the bag. The second person
takes the complete pole (3m) and connects it to the grounpin which is already in the
ground. After the complete pole (3m) is connected to the groundpin lower the string
lights completly and save the plastic bags for next time.
Connect the Velcro bands
10
As you can see there are several Velcro bands added already. These Velcro bands
should be fi xed (closed) from top to bottom and from left string to right string. Secure
the strings with the remaining Velcro bands to each other with the LEFT and RIGHT
labels added together (so left to right and left to right etc) and the light strings are
secured. Make sure the ropes and light chains are in the correct position before
fastening them to the already placed ground pegs. Do this in a sequence of securing
the 2 opposite each other to raise the 3D eff ect.
Note: The outside diameter of the assembled Tree with light chain is approx Ø125
cm max
Secure strings and connect the light chain to the ground pegs
9
Secure the strings with the remaining Velcro bands to each other with the LEFT and
RIGHT labels added together (so left to right and left to right etc) and the light strings
are secured. Make sure the ropes and light chains are in the correct position before
fastening them to the already placed ground pegs.
L R
FlinQ Smart Outdoor Christmas Tree Luminus