Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SHELF PLACEMENT
WARNING:
To ensure the oven shelves operate
safely, correct placement of the
shelves between the side rail is
imperative. Shelves and the pan only
can be used between the first and
fifth layers. The shelves should be used with the right
direction, it will ensure that during careful removal of
the shelf or tray, hot food items should not slide out.
WARNING:
To avoid possible electric shock, disconnect the
power supply and be sure the appliance is fully cold
before replacing the lamp.
Only use 25 W/220-240V~ type G9, T300 halogen
lamps.
Replacing the oven light.
1. Switch off and disconnect the power from the
oven. Ensure that the internal parts are cool before
touching internal parts.
2. Remove the lamp cover by turning it counter-
clockwise (note, it may be stiff), replace the bulb with
a new one of the same type.
3. Insert the new bulb, which should be resistant to
300
C. For replacement bulbs contact your local
o
service centre.
4. Re-fit the cover.
5. If in any doubt, consult a qualified electrician for
help.
-22-
Werbung
