Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical connection
WARNING -THIS APPLIANCE MUST BE EARTHED.
Power supply voltage and frequency: 220-240V~,
50Hz-60Hz.
The cooker is designed to operate on a electricity
supply which conforms to the electrical data shown
on the Rating label.
Note: the following installation procedure must be
carried out by a qualified electrician.
For the installation of the mains cable carry out the
following operations:
1. Open the terminal board by inserting a screwdriver
into the side tabs of the powercode cover. Use the
screwdriver as a lever by pushing it down to open
the cover as below:
2. Connect the electricity follows the diagram as
printed in the surface of power code cover.
3. Fasten the supply cable in place with the clamp
and close the cover of the terminal board.
Note: The display will light once connect to
electricity.
-10-
Werbung
