Operation; Menu Structure; Set Operation Timer; Set Delay Timer - Witeg Wisd Wac-R Bedienungsanleitung

6 Operation

6.1 Menu structure

Main switch
„On"
Locking mode
6.7
Cycle mode
6.8

6.2 Set Operation Timer

The Operation Timer serves as automatically stop function and opens the steam outlet after the
time is elapsed.
 Use MAIN button to reach next menu without setting a delay time.
 The delay time is adjustable from one minute till over 99 hours (00:01 - 99:59) in one
minute steps.
 Turn the Jog-Dial knob to set the delay time. Push the Jog-Dial if you reached the desired
value to confirm it. With the confirmation the timeframe starts elapsing.
 If you want to change the value after confirmation, you have to push the Jog-Dial once
again. The PV initiates blinking and you can modify the value again.
 To confirm the value and start the delay time push the Jog-Dial yet again.
 With "00:00" value of Timer SV, the machine cannot start operation.

6.3 Set Delay Timer

The Delay Timer serves as automatically start function. It turns on the heating after the
timeframe you set is elapsed.
To reach this sub menu item you have to use the SUB button in the menu "set turn-off delay"
24
6.2 Set Timer mode
Set Printer
6.6
Set
6.6.1
Date & Time
Set Name
6.6.2
Set Delay Timer
6.3
mode
Set Temperature
6.4
6.5
witeg Labortechnik GmbH, WAC-R Steam Sterilizer
www.witeg.de
Temperature
Offset