Operating Surface; Term Describtion; Positioning The Device And Commissioning; Positioning The Device - Witeg Wisd Wac-R Bedienungsanleitung

4.3 Operating surface

LCD with
back-light
MAIN button
Door Open button
SUB button

4.4 Term describtion

SV: set value (upper line, in key lock menu no SV)
PV: present value, measured by the device (lower line, in key lock menu also upper line)
Timer lamp
 Is blinking in menu items for timer modulation
 Shines continuous in the key lock menu item when timer activated.
Heating lamp
 Shines if the heater is activated.
Error lamp
 Shines when an Error message is present.
Jog-Dial knob
 Changes values by turning, stores, confirm, stops and starts by pushing.
MAIN button
 For changing between the different menu items and the key combination.
SUB button
 To reach the sub menu Items.
OPEN button
 For unlocking the Opening mechanism
Safety switch
 The safety switch turns the heating off if your set maximal temperature is overshoot.
Set the maximal temperature rough 20 – 30 °C over the desired maximal temperature,

otherwise the device maybe not reaches your set value

5 Positioning the device and commissioning

5.1 Positioning the device

1. Follow especially the safety instructions marked with following symbol:
2. Remove the package and perhaps soiling carefully.
3. If there are any unexpected transport damages, please inform your forwarder and your
customer service.
22
.
witeg Labortechnik GmbH, WAC-R Steam Sterilizer
www.witeg.de
Timer lamp
Heating lamp
Error lamp
Jog-Dial knob