Scansonic IN220 Benutzerhandbuch Seite 8

IN220
INTERNET /DAB+/
FM RADIO WITH BT
Equaliser
Several preset EQ modes are available: FLAT, CLASSIC, ROCK, POP, JAZZ
Network
• View settings
You can check the following information on the currently connected network:
Active connection, MAC address, WLAN region, DHCP.SSID, IP address, subnet mask,
gateway address, first and second DNS.
• WLAN region
Select a WLAN region for optimal WLAN connectivity:
Most of Europe, USA, Canada, Spain, France, Japan, Singapore, Australia, Republic of
Korea.
• Manual settings
Select either a wireless or wired connection and activate/deactivate DHCP.
• Network profile
The radio stores the last four wireless networks that were connected and attempts each time
to reconnect to one of them. You can view a list of the registered networks. From here you
can delete unwanted networks by turning the SELECT control followed by pressing on it to
confirm delete.
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play mode.
1. During System settings mode, rotate the SELECT control to select Inactive Standby and
then press it to confirm.
2. The display will show : Off > 2 hours > 4 hours > 5 hours > 6 hours
3. Rotate the SELECT control to and then press it to confirm.
Language
The default language is English.
To select other languages, rotate the SELECT control followed by pressing on it to confirm.
Factory reset
Perform a factory reset returns the unit to factory settings. All manual settings such as time,
date, network configuration and presets are deleted.
The radio's current software version is not affected and remains as it was registered in
the Internet-Radio-Portal. Favourites in the Internet radio remain until newly registered with
another account in the Internet portal.
Software update
Software updates are made available from time to time. You can either check manually or let
the radio to check automatically. If a new software version is found, the radio prompts you to
confirm. The new software will be downloaded and installed upon getting your confirmation.
User settings are maintained.
8