Wireless Network; Getting Started - Scansonic In220 Benutzerhandbuch

SET UP & CONNECTION
Mains Connection
1. Insert the DC power jack of the AC/DC adaptor to the DC in
socket located at the back of the unit.
2. Plug the AC/DC adaptor to the AC mains outlet.
Network Connection
Wired network
1. Check first of all whether the control lamps (LINK/ACT) of your LAN connection or your
router light up.
2. Use an Ethernet cable with RJ45 connector to connect the NETWORK socket of the
radio with the LAN port of your router.
3. Proceed for the operation as described in the below "GETTING STARTED". But no need
to run through the setup wizard.
Note: Information on the LAN connection can be obtained from the user manual of the router
manufacturer.

Wireless network

1. Check first of all whether the control lamps (LINK/ACT) of your WLAN connection or
your router light up.
2. Proceed for the operation as described in the below "GETTING STARTED". It is highly
recommended to run through the setup wizard in the system settings section.
Note: Information on the WLAN/WiFi network connection can be obtained from the user
manual of the router manufacturer.
Walls or other obstacles may influence the WiFi range. Try to find the best location to avoid
interruption and interference while operating.

GETTING STARTED

When you first connect the unit to the mains socket, the unit will be in Standby mode after
starting. Press button once to switch on the radio, the display will show the Setup wizard,
rotate the SELECT control followed by pressing on it to confirm the setting step by step.
Main menu
The following modes can be selected in the main menu:
Internet radio, Music player, DAB radio, FM radio, AUX in, Sleep, Alarms, System settings.
To select your desired function, rotate the SELECT control followed by pressing on it to confirm.
System settings
Set up wizard
The setup wizard is available in the system settings section, you can run through this to
configure settings for date/time and network, once this has finished, your radio is ready to
use.
Note: No need to run through the setup wizard if a wired network is used.
• 12/24 hour display
To select your preference between 12 or 24 hour clock display format - rotate the SELECT
control followed by pressing on it to confirm.
6
IN220
INTERNET /DAB+/
FM RADIO WITH BT