Herunterladen Diese Seite drucken

Scansonic IN220 Benutzerhandbuch Seite 7

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Time/Date
The time and date can be manually set or automatically via the network, DAB or FM.
Auto update
The auto update works with data sent over DAB, FM or the Internet. The clock is only
updated when in a corresponding mode, so it is recommended to select a mode that you
use regularly.
1. Select auto update from DAB, FM or Network.
2. Select the appropriate time zone if the auto update is done by the Internet.
3. If your country uses daylight saving, the automatically update time may be wrong by one
hour. Set the daylight savings to ON when daylight savings are in effect.
Manual set
1. If "No update" is selected, the wizard will prompt you to set the
time and date manually. The date and time are displayed in
dd-mm-yyyy and hh:mm AM/PM format.
2. The value to be set will flash, rotate the SELECT control to
adjust the value followed by pressing on it to go for the next
setting, first set the date then finally the time.
• Network
The unit is compatible to all standard network protocols and encryption methods, including
Wi-Fi Protected Setup (WPS). In case of an unencrypted network, the unit will automatically
establish connection and no further settings are necessary.
Standard encrypted network
1. To enter the network key (password), rotate the SELECT control to move the cursor
through the characters to be selected and press on it to confirm.
2. The key that is entered will be displayed in the upper part of the display.
WPS-encrypted network
WPS-encrypted networks are identified by their network names as soon as the unit starts
searching for available network connection. Select one of the following connection methods:
- Push button
The radio prompts you to press the connection button on the router, it then scans for a
corresponding network and establishes the connection.
- Pin (code number)
The radio generates an 8-digit code number. Enter this code number into the wireless router
or access device.
- WPS
- Enter the network key for a standard encrypted network.
Note: Additional information on setting up the WPS-encrypted networks can be obtained in
the user manual of your WPS router.
• Completion
The radio establishes connection with the selected network.
If connection is failed, the radio returns to the previous display and prompts you to retry.
If an existing network connection is lost, it would automatically attempt to retry for
reconnection.
IN220
INTERNET/DAB+/
FM RADIO WITH BT
Set Time/Date
''
//
01-01-2007
''
//
00:00
7

Werbung

loading