Herunterladen Diese Seite drucken

DTM System FLEX4G Betriebsanleitung Seite 16

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. GENERAL INFORMATION
FLEX4G is a 2/4-channel radio receiver equipped with an LTE module operating in the 4G mobile network
(compatible with 2G). The receiver enables remote control of automation using remote controls, telephone
(CLIP) and Android and iOS applications.
The receiver is managed using the CloudFlex application on the website www.cloudflex.dtm.pl
The receiver has two relay outputs for connecting automation devices. Additionally, it is equipped with 2
information and control inputs for connecting automation status sensors (e.g. limit switch) and/or manual
control buttons.
It is possible to extend the functionality of the receiver with two additional output and input channels by
connecting an additional FLEX4G-MR module.
2. TECHNICAL DATA
power supply:
current consumption:
remote control memory capacity:
radio frequency:
receiver relay outputs
(type / quantity / maximum load):
information and control inputs:
output operation mode:
adjustment of backup time in monostable mode:
supported technology:
cellular network frequency:
antenna:
operating temperature:
mounting method:
external housing dimensions
/ receiver boards (width x length x height):
receiver control:
real-time clock:
12...24V AC/DC ±10%
800mA
9 999 transmitters
868MHz, optional 433MHz radio module
NO or NC / 2 / 1A 24V AC or DC
2, programmable NO/NC type,
minimum violation time 100ms
monostable, bistable, momentary
from 0.1s to 23h 59m 59s, with 0.1s resolution
4G / 2G
700 / 800 / 900 / 1800 /2100 / 2600 MHz
omnidirectional rod with a gain of 3dBi terminated
with a male SMA plug; (GSM-3G, bent rod,
850/900/1800/1900/2100 MHz), transition antenna
cable terminated with a female U.FL plug and a
female SMA socket.
-20°C /+55°C
outdoors in a splash-proof plastic housing IP-54
72x132x41mm / 58x90x27mm
using DTM868MHz system transmitters, optionally
DTM433MHz, CLIP connection, manual control
buttons, V-PILOT application, from the browser level
via CloudFlex application
with battery backup for event recording

Werbung

loading