Sony INZONE M10S Bedienungsanleitung Seite 4

When not in use
• If you will not be using the OLED Monitor
for several days, the OLED Monitor should
be disconnected from the mains for
environmental and safety reasons.
• As the OLED Monitor is not disconnected
from the mains when the OLED Monitor
is just turned off, pull the plug from the
mains socket to disconnect the OLED
Monitor completely.
For children
• ALWAYS keep small accessories out of
the reach of children, so that they are not
mistakenly swallowed.
If the following problems occur...
Turn off the OLED Monitor and unplug
the mains lead immediately if any of the
following problems occur.
Ask your dealer or Sony service centre
to have it checked by qualified service
personnel.
When:
• Mains lead is damaged.
• Poor fitting of mains socket.
• OLED Monitor is damaged by being
dropped, hit or having something thrown
at it.
• Any liquid or solid object falls through
openings in the cabinet.
About OLED Monitor Temperature
When the OLED Monitor is used for an
extended period, the panel surrounds
become warm. It may feel hot when
touching it with your hand.
Medical Institutions
This product cannot be used as a medical
device. It may cause a medical equipment
malfunction.
Do not place this product close to
medical devices
This product (including accessories)
has magnet(s) which may interfere with
pacemakers, programmable shunt valves for
hydrocephalus treatment, or other medical
devices. Do not place this product close
to persons who use such medical devices.
Consult your doctor before using this
product if you use any such medical device.
Keep out of the reach of children or
the supervised individuals
This product (including accessories) has
magnet(s). Swallowing magnet(s) could
cause serious harm, such as choking hazard
or intestinal injuries. If magnets (or a
magnet) were swallowed, consult a doctor
immediately.
Magnetic influence
This product (including accessories such as
covers) uses magnets.
Do not place magnetically sensitive objects
(cash cards, credit cards with magnetic
coding, etc.) near this product.
4
EN
Precautions
• View the OLED Monitor in moderate light,
as viewing the OLED Monitor in poor light
or during long period of time, strains
your eyes.
• When using headphones, adjust the
volume so as to avoid excessive levels, as
hearing damage may result.
OLED SCREEN:
• Although the OLED screen is made with
high-precision technology and 99.99 % or
more of the pixels are effective, black dots
may appear or bright points of light (white,
red, blue, or green) may appear constantly
on the OLED screen. This is a structural
property of the OLED screen and is not a
malfunction.
• To avoid damaging the OLED screen, do
not expose the OLED screen to direct
sunlight.
• Do not push or scratch the OLED screen of
this monitor. The image may be uneven or
the OLED screen may be damaged.
• The screen and cabinet get warm when
this monitor is in use. This is not a
malfunction.
• Avoid spraying insect repellent with
volatile material on the OLED screen.
• Avoid prolonged contact with rubber or
plastic material to the OLED screen.
• When disposing of your monitor be sure to
follow your local laws and regulations.
Protecting the Screen
Precautions to Protect the Screen
from Damage
Image retention
OLED Monitor's are susceptible to image
retention (burn-in) due to the characteristics
of the materials used. Image retention may
occur if images are displayed in the same
location on the screen repeatedly or over
extended periods of time. This is not a
malfunction of the monitor. Avoid displaying
images that may cause image retention.
The following are examples of
images and displays that may
cause image retention:
• Content with black bars either on the top
and bottom and/or the left and right sides
of the screen. (for example, Letterboxed,
4:3 screen)
• Static images such as photos.
• Static content from applications.
• Displays of Frame rate counter, Crosshair,
Timer in Gaming assist.
To reduce the risk of image
retention:
• Sony recommends that you turn off the
monitor normally by pressing the power
button on the monitor.
• Fill the screen by changing [Aspect ratio]
to eliminate the black bars.
• Avoid displaying static images with bright
colors (including white) or logos on any
portion of the screen.
• Set the picture settings based on the
ambient conditions. The standard setting
of Game mode is recommended for
Picture mode.
• Turn off displays of Frame rate counter,
Crosshair, Timer in Gaming assist.
The monitor has following features to help
reduce/prevent image retention.
Panel refresh
A panel refresh will adjust the panel
uniformity. Panel refresh can be performed
and should only be used when image
retention is very noticeable.
Caution:
• The Panel refresh function may affect
the panel. Do not perform Panel refresh
more than once a year as it may affect the
usable life of the panel.
• The effectiveness of a panel refresh may
vary depending on the image retention
condition.
• Panel refresh takes up to one hour to
complete.
The following also applies for some models
as indicated before executing a Panel
refresh.
• A white, red, green, or blue line may be
displayed on the screen during the Panel
refresh, this is not a malfunction of the
monitor.
• Panel refresh will only work when the
room temperature is between 10 ºC and
40 ºC.
Pixel shift
Automatically moves the image on the
screen to prevent image retention.
Other feature
The screen brightness is automatically
reduced when displaying still images, clocks,
bright colors or logos etc.
Handling and cleaning the screen
surface/cabinet of the OLED
Monitor
Precautions:
• Avoid touching the screen.
• To remove dust from the screen surface/
cabinet, wipe gently with a microfiber
cloth.
• Never spray water or detergent directly
on the OLED Monitor. It may drip to the
bottom of the screen or exterior parts, and
enter the OLED Monitor, and may cause
damage to the OLED Monitor.
Optional Equipment
• Keep optional components or any
equipment emitting electromagnetic
radiation away from the OLED Monitor.
Otherwise picture distortion and/or noisy
sound may occur.
• This equipment has been tested and
found to comply with the limits set out
in the EMC Standards using a connection
signal cable shorter than 3 meters.