Clearaudio concept Bedienungsanleitung Seite 6

User manual / Bedienungsanleitung
3.5
As all key parameters
Clearaudio factory, all you need to do is to level the
turntable using the level gauge provided.
3.6
If the bubble of the level gauge is not centered
within the black circle, please turn the turntables
feet clockwise or anti-clockwise
perfectly leveled position.
You will only get the best sound from your concept
turntable if the turntable is perfectly leveled.
3.7
Connect one end of the external
provided to the socket on the rear of the concept
turntable and the other
Then connect the tonearm cable to your phonostage
(red plug = right channel, black plug = left channel).
Your conceptturntable
and ready to play.
We wish you a lot of pleasure with your new concept
turntable.
Page / Seite 6
have been adjusted at the
until you reach the
power supply
end to a live AC outlet.
is now completely assembled
Pic. 6: Levelling the turntable
Lock screw
Pic. 7: Adjustment of the turntable feet
Pic. 8: Power supply of the turntable
O clearaudio electronic GmbH