Hama SCORPAD PRO Bedienungsanleitung Seite 7

Charging function
Tocharge the controller's battery, connect the supplied
USB cable to the controller
controller and console must be switched
Charging time
Charge the controller for at least 30 minutes - the
battery is fully charged after 2 hours at the most, andthe
controller is again readyfor use.
Red LED:
• Flashing:Controller is being recharged
• Illuminated: Controller has finished recharging
• Flashingquickly: Not connected to the receiver
• LED illuminated: Connected
controller position (1—4) h as been assigned
Receiver LED:
• Red LED flashing: Not connected to the controller
• Red LED illuminated: Connected
Notes
If some buttons do not function in the game, check the
button settings in the option menu.They can generally be
configured there as well. Also refer to the manual of the
gamein question.
VI. Safety instructions
1. Donot attemptto service or repair the device yourself.
Leaveany service work to qualified experts
2. Donot modify the device in any way. Doing so voids
the warranty
and the console. The
on for this.
to the controller and a
7