Beurer BR 10 Gebrauchsanweisung Seite 51

Problem
Application cannot be
started, even though the
ON/OFF switch
set to ON.
The device does not
switch on, even though
the batteries have been
replaced and the ON/
2
OFF switch has been
set to ON.
Possible cause
Device has switched
o automatically. Either
2
is the activation button
was pressed for more
than 2 seconds or it
was not used for more
than 2 minutes and the
automatic switch-o
was activated.
The device may be
faulty.
Solution
First switch the device to
OFF using the ON/OFF
switch
it on again as usual.
Please contact Customer
Services.
51
2
and then switch