■ 13 REMARKS
The corrosion monitor will stop measuring when the mains adaptor
is removed. The internal data will be retained. The measurements
will simply continue when the mains adaptor is reconnected.
EN
Measurements older than 7 days have no influence on the
determination of the corrosion rate.
■ 14 ACCESSORIES
14.1 USB CABLE
A separate USB-C cable is used for reading out the logger (also
available on the normal market).
14.2 RETRACTOR
The Retractor is a specially designed tool to service any X-probe
during normal operation without interruption.
For this use the special X3 Retractor shaft coupling.
Refer to the Retractor manual.
41