Cleaning And Maintenance; Cleaning; Maintenance; Technical Details - Powerplus Set12 Bedienungsanleitung

Note: The amount of actual torque may vary depending on the cleanness
and condition of the threads and other factors. If tightening critical
components, chase threads before assembling components and check the
actual torque applied to the fastener with a mechanical torque wrench (not
supplied).

11 CLEANING AND MAINTENANCE

11.1

Cleaning

▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2

Maintenance

▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.

12 TECHNICAL DETAILS

Model nr.
Rated voltage (direct current)
Rotation speed
Impact rate
Socket type
Max. torque

13 NOISE

Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2020 VARO
POWDP20400
POWDP20400
40 V
0-2000 min-1
0-3300 ipm
1/2"
350 Nm
87 dB(A)
98 dB(A)
4,0 m/s²
P a g e | 11
K = 1.5 m/s²
www.varo.com
EN