Cleaning And Maintenance; Cleaning; Maintenance; Technical Details - Powerplus Powdp20161 Bersetzung Der Originalbetriebsanleitung

WARNING: Do not stare directly at the light beam. Never aim the beam at
any person or an object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not
directed towards the eye of a person for longer than 0.25s .

10 CLEANING AND MAINTENANCE

10.1

Cleaning

Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
▪
damage the plastic parts.
10.2

Maintenance

Our machines have been designed to operate over a long period of time with a minimum
▪
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.

11 TECHNICAL DETAILS

Model nr.
Rated voltage (direct current)
Rotation speed
Impact rate
Socket type
Max. torque

12 NOISE

Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2024 VARO
POWDP20161
POWDP20161
20 V
0-1300 min-1/0-2000 min-1/0-2900 min
0-4350 ipm
1/2"
Max. 2/100/220 Nm
93 dB(A)
101 dB(A)
Max. 6,8 m/s²
P a g e | 11
-1
K = 1,5 m/s²
www.varo.com
EN